SCRUBBED
MARK TEST |
| 1. |
Purpose: |
| |
1.1 |
Find out the correct setting of scrubbing
current for the Scrubbing Machine |
| |
1.2 |
Check the Scrubbing Property of Brush Rollers. |
| 2. |
Test
Procedure |
| |
2.1 |
Convey a piece of CCL or PCB just under the Brush,then
stop the conveyer. |
| |
2.2 |
Hand rotate the brush a few rotations or turn on
the motor for a few seconds. |
| |
2.3 |
Check the scrubbing mark or“footprint”(Please reference.the<Standard
Data For |
| |
|
Brush Rollers>) |
| |
Standard
Data For Brush Rollers(PCB Industry) |
Scrubbed Mark Test |
